Frp Grating Construction Solution

Frp Grating Construction Solution

Frp Grating is a composite material made of resin and fiberglass that is corrosion-resistant, fire-resistant, and lightweight. It can be used for various applications such as walkways, platforms, protective shielding, machinery housings, raised floors and stairways. Frp Grating can be installed easily and quickly with simple tools and methods. Here are some accessories and installation instructions for Frp Grating.


Frp Grating Accessories

There are different types of accessories for Frp Grating, such as clips, hardware, pedestals, sealing and bonding kits, grating edge ramps, etc. These accessories are used to secure the grating panels to the supporting structure or to each other, to provide adjustable support for elevated flooring, to seal the cut edges or penetrations of the grating, and to provide a smooth transition from the grating edge to the solid flooring beneath. These accessories are made of stainless steel or FRP material for maximum corrosion resistance and durability.

Some examples of Frp Grating accessories are:

Clips and assemblies: Specially designed to secure grating panels to one another and to supporting structures.

FRP hardware: Non-conductive, corrosion resistant threaded rods, nuts and washers.

Grating pedestals: Adjustable support for elevated flooring.

Sealing and bonding kits: For sealing grating cuts or penetrations and bonding surfaces together.

Grating edge ramps: Designed to provide a smooth transition from the grating edge to the solid flooring beneath, especially for rolling traffic. 


Frp Grating Installation Instructions

Before installing Frp Grating, you should follow some safety precautions, such as:

Read the Material Safety Data Sheet and follow the manufacturer’s recommendations.

Wear protective gloves, goggles, mask, and clothing when handling or cutting FRP products.

Use dust extraction system or P2 dust mask when cutting to reduce inhalation of dust.

Avoid contact with skin or eyes with dust or resin from FRP products.

Consult a physician if you experience difficulty in breathing or excessive skin irritation from FRP products.

To install Frp Grating, you should follow these steps:

Measure the area where you want to install the Frp Grating and cut the panels to the desired size and shape. You can use a circular saw, a jigsaw, or a hacksaw to cut the panels. Make sure to wear protective gloves, goggles, and mask when cutting.

Place the panels on the supporting structure and align them properly. You can use clips, bolts, or screws to fasten the panels to the structure. Make sure to leave some gaps between the panels for thermal expansion and contraction.

Trim the edges of the panels if needed and seal them with resin or silicone to prevent water ingress and corrosion.

Check the installation for stability, safety, and appearance. You can also apply a non-slip coating or a UV-resistant coating to enhance the performance and durability of the Frp Grating  

Related FRP Profiles

Get Quote & Solution

Get Quote & Solution